When do you need bulk ethernet cables? This is the most common practice we always do while installing the wires in our home, office, or gaming rooms. But one thing that remains the same is the right choice of cabling. For gigabit networking, you can go with Cat 6 Riser Cable, the sleek, rigid, and the most promising network cable to deliver blazing-fast speed. Cat6 Ethernet Cable is not just a LAN cable but a solution for High-End Applications that demand speed.
In this blog, you will learn about the buying guide, the Cat 6 riser cable features, the importance of the conductor, and the other FAQs related to the cat6 riser 1000ft cable which are necessary to understand while installing the cable.
Buying Guide of Cat6 Ethernet Cable
Bulk ethernet cable buying is quite simple but tricky when you are unaware of the specs of the cable. Just like the Cat6 riser cable 1000ft is used when you are not sure about the length of the cable. So what is the installation guide for Cat6 Bulk Ethernet Cable? Here are some of the points that will give you a vivid idea.
First comes the length of the cable, which is the ultimate need to install the cable properly without tight fittings. Second is the speed requirements or the future speed upgrade demands for the server. Later on, the installation location whether you need Shielded or Unshielded cables. Moreover, the most important thing is the outer jacket ratings that benefit the steady LAN cable structure and protect against environmental challenges.
The ideal distance to install bulk ethernet cable is 100 meters (328ft) and it is avoided to extend the cable length no matter if you are using the cat6 riser bare copper cable the installation length is the same.
Why Do You Need Bulk Ethernet Cables?
Ethernet Cables are available in different lengths like 100ft, 250ft, 500ft, and 1000ft bulk ethernet cable. Furthermore, patch cables are also available in 1-meter to 25-meter according to the need for installation. The patch cables are mostly used for short connections or to connect with the keystone jacks installed in the room or living rooms to access the internet — plug and play.
There is another need to use bulk cable to ease your mind that you might be short of cable’s length. Also, some factors might affect the cable lengths..
- Number of connection points
- Room Layout/Office Layout
- Cable routing
These are some of the most common factors that may create hindrances to the cable length. And if your focus is on cable management to avoid tangled. Bulk Ethernet Cables should be your priority. Cat6 Ethernet cable in 1000ft is the best option for your gigabit server.
Cat6 Riser Bare Copper Cable Inner Specs
First thing first, the Cat6 riser bare copper cable is the next advancement in the bulk ethernet cable category. It is best known for its 1 Gbps speed over longer runs and 10 Gbps speed over shorter lengths. The 23 AWG conductor shows the thickness of the Cat 6 riser cable and ultimately points out towards the transmission speed. The cable has double the bandwidth capacity of 550 MHz to perform better for the Fast Ethernet Applications.
Moreover, you will observe 5-6 twists per inch in the twisted pair design of the cable to create a flawless current flow without any distortion. There is another feature “Spline” known as a twisted pair separator to avoid pair-to-pair crosstalk. With Cat6 Riser Bare Copper Cable a backward compatible can count on
- 100BASE-T (Fast Ethernet)
- 1000BASE-T (Gigabit Ethernet)
- 10GBASE-T (Future Ethernet)
- PoE/+/++ up to 90 watts DC
- Streaming audio and video 4K and 8K
- Gaming consoles
- IoT devices (Internet of Things)
Conductor Importance — Why Copper?
Known for its conductance, copper is the best conductor to use in bulk ethernet cable assembly. You cannot deny the low electrical resistance, the better heat dissipation capacity, the anti-corrosive properties, and the ability to transfer current (Data Packets) from one place to another.
In Cat6 Riser Bare copper cable contains a pure copper conductor which is the indication of the fastest networking. Though copper is expensive it has a larger lifespan of almost 8-10 years depending on the environment.
Can You Connect the Cat6 Ethernet Cable To Cat5e?
This is a technical practice to extend the cable length. The ideal length to install cable is 328ft. But you can use patch cables according to your required length 5ft patch cable on each end of the cable.
When extending the connection it is recommended to use an inline coupler and avoid splicing ethernet cables. You cannot extend the Cat6 Riser cable 1000ft length by adding the Cat5e cable as it might restrict the speed and connectivity issues, and the cable might restrict the speed below 1 Gbps.
Is Riser Shielded or Unshielded?
The riser is a PVC jacket that is designed to be used in the vertical spaces of buildings where the chances of fire progression are minimal. If you are saying the Cat 6 riser cable is shielded then you are wrong shielded cables are extra insulated cables mostly with Aluminum Foil and Braided Mess.
Shielded cables are thicker, have a lower bending radius, and are powerful enough to halt entering unwanted signals to influence the speed of the cable. The riser is a cost-effective jacket in the bare copper conductor to provide you with maximum safety and performance.
Does the Color of the Bulk Ethernet Cable Describe Performance?
Cat6 Riser Cable comes with multiple color options which means you can use this cable for your cable management. To analyze the cable performance through its color is not the right practice. The Bulk Ethernet Cable color only gives an idea of using it for a single connection when you are dealing with bulk ethernet cables.
Data centers, Network closets, and wiring buildings or offices are the common examples. The color option will ease you in troubleshooting the LAN cables and allow you to identify the faulty connections.
Bottom Line
Cat6 Ethernet Cable is a high-end networking cable that caters to all the gigabit demands over longer runs. The backward compatible Cat 6 riser cable will allow you to use this cable with the older equipment to support 100 Mbps speed.
But the Cat6 riser 1000ft cable provides room for upgrading the speed of your server to meet the cable speed requirements. The 23 AWG conductor size allows maximum capacity to transfer the signals with bleeding. Looking for a Bulk Ethernet Cable, Go with the Cat6 Ethernet Cable.
Leave a Reply
You must be logged in to post a comment.